Atelier Je Design created the hot Seat Leon Cupra

Atelier Je Design created the hot Seat Leon Cupra

November 12, 2017 0 By autotimesnews

In fact, there are not so many “stock” hot-hatches in the world that can challenge the extreme Audi RS3 in terms of dynamics: a competent all-wheel drive, a turbocharged five-cylinder engine, a hardy “robot” and good regular rubber with a launcher control allow the car to accelerate to first “hundreds” in 4.1 seconds. But even in the basic version, the car is not cheap, and the German tuners from Je Design propose to Seat Leon Cupra owners to “pump” their car to such an extent that he can challenge the “German”.

Externally, the hatchback from the standard can be distinguished from the standard one thanks to the new bumpers, diffuser, spoiler, and also branded wheels with 265/25 R20 Hankook S1-Evo tires.

Under the hood of the factory Seat Leon Cupra there are two-liter turbocharged “four” with a return of 300 forces, however, the Je Stage Stage 2 tuning kit increases this figure to 380, which is only two dozen forces less than the turbo “five” develops in volume in 2.5 liters on the Audi RS3 Sportback. This indicator allowed to raise the maximum speed of the hatchback to 285 kilometers per hour, but the tuners warn owners that they will need to refuel with high-quality European fuel with an octane number of 98. To ensure that the engine is breathing properly, the tuners install an active titanium exhaust system with a diameter of 76 mm.

Well and where without a suspension bracket: the standard “walker” has been underestimated by 20 millimeters, but enthusiasts can take advantage of an optional kit that includes a set of KW DCC racks with an electronic control unit that will help lower the hatchback by 45 millimeters.

[supsystic-slider id=202 position=”center”]